Inverter installation is a critical step in upgrading your home’s electrical system. And the process of installation can be complicated and error-prone if you do not consider certain factors.
Examples are the wrong inverter spot, improper AC inverter installation, and wrong wire length. These mistakes can lead to issues with your power supply and poor inverter performance. Also, these mistakes can cost you more than what you spend.
You can avoid most mistakes if you do some research before purchasing or signing contracts with installation companies. Moreover, you need to hire the right company to install your inverter correctly.
Four mistakes to avoid during inverter installation
AC power industrial inverters are a necessary part of most businesses. They allow you to power equipment without having to connect to the electricity. However, there are four mistakes you should avoid when installing these AC inverters:
1. Improper installation
The most common mistake during installation is placing an inverter next to a space heater or other heat source, which can cause your unit to overheat and shut down.
Moreover, installing the inverter near a water source like faucets, shower heads, and toilets is equally dangerous. An improperly installed inverter may lead to a short circuit.
Also, ensure that high-voltage lines aren’t nearby before connecting anything else up. Since these lines carry electricity at high speeds, keeping them safe is essential to prevent accidental electrocution accidents.
2. Wrong wire size
The DC wires connect the inverter and the battery bank. Therefore, installing your AC inverters close to the battery bank is always advisable with the appropriate lengths of cables.
The wrong wire size can be a severe problem, primarily if you use an inverter designed for small loads. If your inverter is overloading or underloading, it will not last as long as one designed for the correct voltage and current levels.
You can ask an expert if you’re unsure about the length and type of wires you should use.
3. Inappropriate location
The inverter’s location is a determining factor in the life of an inverter. Your inverter can last for years if appropriately placed.
A wrongly placed inverter can reduce its life span. For example, an open area large enough for air to circulate is the best location for the inverter.
Besides, placing your inverters near excessive heat-producing areas like an engine compartment can reduce its lifespan. Even corrosive elements like non-sealed flooded batteries gassing can also harm AC inverters.
Never install an AC power industrial inverter in a damp area or near water, like a pool or hot tub.
The water vapors and humidity from nearby water sources can cause corrosion on the electrical connections and other parts of your inverter. It leads to a faulty inverter and sometimes appliance failure.
Moreover, don’t place your inverter too close to flammable materials such as rags, gas cans, and furniture polish. As soon as you turn on your inverter, they’ll cook up some severe flames and can burn down your house.
4. Not hiring the right installation service agency.
One of the most common mistakes homeowners make when installing an inverter is hiring an unlicensed and unregistered company. Hiring professionals is essential if you want your project to go smoothly.
It also reduces costs by reducing unnecessary expenses like unnecessarily having multiple people working on the project. Or waiting days until someone replaces another worker who left because they weren’t adequately trained enough yet.
To avoid all this mess, you can hire an experienced company like Exeltech. The company ensures that your AC power industrial inverter installation goes smoothly from start to finish.
