You know that power outages come unannounced, which is why you decide to invest in an emergency power source. Choosing between inverters and generators took a while.
But you stuck to inverters because they turn on immediately, without switching off the connected appliances. There’s no need to wait for a few seconds for it to turn on, like most generators.
You have invested quite a lot in your AC power industrial inverters to have no downtime on your productivity. So it’s pretty normal to get confused and frustrated if your AC power industrial inverters do not turn on immediately.
You wonder what the problem is and what you can do about it.
Here are the most common reasons and solutions to the issues.
1. Low voltage
This is perhaps the most common cause for an inverter not turning on. And unfortunately, it’s something that you can’t do much about.
The solution only lies in checking the voltage using a voltmeter to ensure it’s constant.
If it’s up to the mark, there may be some other reason for the inverter not switching on.
However, if the voltage is low, you will have to turn on the inverter manually.
2. Blown fuse
Having a blown fuse is another reason for your inverter not turning on automatically during a power outage. This fuse is usually an in-line fuse found plugged into the outlet.
It plays an essential part in turning on the inverter. You can check to see if it is blown. If it is, then it is better you don’t replace it but instead leave it to a professional to do it.
3. Battery problems
The battery is practically the soul of the inverter. So anything that goes wrong with it can lead to the inverter not turning on. Here are some possible problems that may occur with the battery.
- With inverters depending on the battery for power, you must charge the battery to power the unit. That’s why you need to keep checking the battery levels to ensure it is fully charged.
A weak battery without much power is another possible cause for an inverter not turning on itself. The solution, of course, lies in charging the battery. You have to charge it for at least a few hours before using it again.
- Sometimes the power may not turn on with reversed battery terminals. If this is the case, connecting them properly solves the problem.
- There are also cases where the inverter doesn’t turn on because of a faulty battery. In this case, replace the battery and try turning it on again.
- Check the battery connections. The inverter doesn’t turn on automatically if the battery isn’t connected.
Also, check if the battery terminals are loose as loose terminals cause a problem too. Tightening and connecting the terminals help solve the problem.
4. No input connection
Last but not least, an inverter that’s not connected to a power point doesn’t turn on. It’s only if and when the inverter realizes there is a power outage that it turns on.
So if it’s not connected to the input, it doesn’t know there’s an outage and won’t turn on. Ensuring the input is connected all the time solves the problem. Similarly, regularly checking the power cable also helps.
There you go!
These are the four most common reasons for AC inverters not turning on automatically and their solutions. Looking at them, you realize that it’s essential that your AC power industrial inverters have to be in tiptop condition all the time. If you have other work to take care of, you can always have technicians from Exeltech ensuring your inverter turns on automatically all the time.